To receive email from CitizensAHT.org, add Mail+CitizensAHT.org@mnb.email to your safe sender list.
View as Web Page Subscribe Unsubscribe Preferences
Citizens Against Harmful Technology
Share on Facebook Share on Twitter More Share Options
Citizens Against Harmful Technology Newsletter
Actively Participate In Educating the Public
June 18, 2017
WEBSITE:  CitizensAHT.org
EMAIL:  CitizensAHT@protonmail.com
IMPORTANT ANNOUNCEMENTS
Thank you all for your support. Blessings to you all!
 
If you are having problems receiving your newsletter, submit your name again to CitizensAHT@protonmail.com. Also, look in spam or trash folders or change settings in your email.
 
Please share your stories, it doesn't have to be your whole life story, just an incident. What are your torturers doing to you today? Have you been diminished in artificial ways with microwave technology?  Are you having problems with doctors?  Also, please send copies of your injuries, burns, etc. so we can publish.
 
Please print a copy of this newsletter and any newsletters you wish to maintain.  Just having them in your email won't save them. You can also copy them into a Word Document with .2 margins.

 
This is an internet reference newsletter. A link to the original article is provided in the colored title line. We claim no authorship of these references, we only reference so you can consider the information. The reference may contain only part of the original article due to space limitations here. Please go to the link to read the complete article. Thank you.
CONFERENCE CALLS
TALKSHOE:  Sunday at 8:30 P.M. East Coast, 7:30 Central, 6:30 Mountain, 5:30 W Coast
(724) 444-7444, Call ID for CAHT: 134999 Pin 1#, Moderator: Neal
 
EMAIL:  CitizensAHT@protonmail.com
If you wish to send a donation in the form of a check or money order, please send an email to CitizensAHT@protonmail.com and you will be sent a physical address. We no longer have the FEDEX po box.

MEMBERSHIPS:  Membership is $25 per year. http://citizensaht.org/memberships
Membership DOES NOT include mailing of hard copies of the newsletter. Please arrange a payment for hard copies by emailing your request to CitizensAHT@protonmail.com. 

Please send an email to CitizensAHT for a membership, Booklet, Brochure, T-Shirt, or Metallic Fabric Cap.  You will be sent an invoice for whatever amounts you wish to donate.
 
 
In This Issue
IMPORTANT ANNOUNCEMENTS
CONFERENCE CALLS
TARGETED INDIVIDUAL TESTIMONY
SHIELDING:  Ordinary Aluminum Screen
FYI:  August 21, 2017
VIDEO:  Trains with military prison transport
NWO:  Picking You for Killing! Its okay says FBI!
MIND CONTROL-Part 1
MIND CONTROL:  Dithering
CELL PHONE DANGER:  Best Video Ever
TI SELF-HELP:  Perps hurt us with words-How to think about it.
TI HEALTH:  Cleanses
ACTIVIST:  Mike Mason
ACTIVIST ELLA-Another Ella
Spiritual Thoughts: Words of Comfort
TARGETED INDIVIDUAL COMMUNITY CONFERENCE CALLS
Activism/Support Groups
SHIELDING:  Linqstat
Newsletters
Disclaimer
TARGETED INDIVIDUAL TESTIMONY
Send CAHT your stalking videos:  Maintain your evidence, make 2-3 copies and place it in different places, on external hard drives, cloud storage or disks. You can also create an email address just for pictures and attach them to emails and send them to yourself. The evidence you gather is very important.  So please share your story and pictures at CitizensAHT@protonmail.com.
 
TESTIMONY ONE:
 Yesterday on way back from orthopedist my husband stopped at market. I fell asleep in the cab of our truck. I woke up to bad pain in left bad knee. I had protection everywhere else on body. My husband left 1/2 inch window opening on other side of car. Woke up in car with pain 10 out of 10. No sooner than my eyes opened I thought I saw a man walking away from window of back seat where I fell asleep towards black suv with another person driving away. But these days unusual stuff when I wake up. I just had good news from doc that no surgery necessary for tear in knee. Hoping knee still ok. Was that acoustic sonic thru the wall radar or what was that?
 
I felt asleep in enclosure last night in fetal like posture (both knees bent) I woke up because both knees really hurt. I had support on both with gel packs but still hurt. As soon as I woke up knees did not hurt so this could have been because of position of how I slept--don't know.

This morning, after I went to pee, I felt an itch on my stomach. These past few weeks I felt cuts, or scratch like cuts on stomach I assumed it was frequency that goes thru everything and paid no attention to that. I thought a scab got caught in my finger nail, I looked. My nails have grown out because I could not locate my nail cutter. I noticed that on my right hand the fourth finger was neatly cut short.
 
The last 3 weeks I kept people out of my enclosure at night by taping more around the edges, since they pulled and bent the shape of the door so it does not close unless you fuss alot over it. I usually cut tape pieces before I stick them on at night. People,or machine dripped oil like substance in hopes to deter tape from sticking onto the surface.
 
During the day, it seems someone always or most of the day in house. My computer only 2 yards away and yet computer needs to be monitored every second or it will delete file while downloading. While on the computer I get the chemical, gas or frequency to knock me out. During this time don't know what happens.
 
While I am on computer someone or thing move things around in my tote bags, tears, steals document or empties out paper garbage inside enclosure and floor. While cleaning they unplug or try to delete or alter photos, video clips . When I am in enclosure cleaning they unplug or break electrical equipment.

This is regular stuff but it keeps me in a busy unwanted loop when I have other stuff to do.

Damage to pillars under the house is continuing and so are the nails.

TESTIMONY TWO:
  
Surveillance planes go over my house every day.




 
 
SHIELDING:  Ordinary Aluminum Screen

Shielding RF Radiation with Aluminum Screening

FYI:  August 21, 2017
6-14-17 M2U04691
https://www.youtube.com/user/davkitchin
Please spread this WARNING if you understand what is being said!!! Around August 21st, 2017 (Great American Eclipse Day) is the time that the end really begins! GET OUT OF THE US!!! The total solar eclipse goes over YELLOWSTONE, the GEORGIA GUIDESTONES and the CASCADE VOLCANOES...

The GEORGIA GUIDESTONES are a "clock, calendar, and compass" If you don't know what they are, then look them up as if your life depends on it..

The GUIDESTONES where unveiled at the same time Mt. St. Helens started to quake in 1980 (i.e. March 22, 1980). At the time that Mt. St. Helens was forced to erupt at 11:32 EST 5/18/1980, the shadow of the guidestones pointed directly at Mt. St. Helens with a bearing of ~292 degrees.

The GUIDESTONES work on an 18.6 year lunar calendar. August 21st, 2017 marks the second passing of this lunar calendar since the guidestones were unveiled 3/22/1980 + 37.2 years is approximately 8/21/1987.

Distances from the Mt. St Helens to the Guidestones is 2209 miles. Distance from Guidestones to Yellowstone is 1637 miles. Ratio of 2209/1637= 1.35

Time from unveiling of guidestones 3/22/1980 to 9/11/2001 = 7843 days
Time from 9/11/2001 to 8/21/2017 = 5823 days
Ratio of times 7843/5823 = 1.35

Around 8/21/2017 HAARP will be fully unleashed causing massive earthquakes and reignite volcanic activity in the North West.

Look out for massive earthquakes that day especially if you live in L.A., the Bible belt, or the Pacific Northwest. The Bible predicts that Babylon will be split into 3 parts when Yellowstone goes off. Look up 1700 mile crack across the us and you'll see that there are two massive faults that the US will be split down.

The Cascade volcanoes will start to show activity and Yellowstone will eventually go off. People will be forced underground in preparation for this event, where they will be given the Mark of the Beast. Revelation 12 is in the sky as we speak and the real labor pains will begin around August 21st, 2017 when Jupiter exits the stomach of Virgo.


 
 
Notice how many times Revelations talks about Angels holding Harps in heaven. Notice how the U.S. has a machine called HAARP that shoots Electromagnetic radiation into the Heavens!!! It's not hard to put together. Please spread the message if you understand what I've stated here. I can't reach everyone by myself, I need people to echo this warning!!! PLEASE WARN FRIENDS and FAMILY.
VIDEO:  Trains with military prison transport

It's no longer a theory, Its reality(WALMART-MART-LAW) Pt.4

NWO:  Picking You for Killing! Its okay says FBI!

Targeted in the US

MIND CONTROL-Part 1
Digital TV, HAARP, GWEN, Silent Sound & Mind Control Technologies Part 1
 
This teaching overviews a secret Pentagon psychotronics technology known as Silent Sound Spread Spectrum (SSSS) that has been fully operational since the early 1990s. The physical, emotional, and psychological effects of this technology were so severe that 200,000 Iraqi troops surrended en masse without firing even a single shot against US led coalition forces.
 
This technology is (most likely) about to be used, albeit in a more subtle fashion, against American citizens in a highly classified and covert operation to mind control and manipulate the entire population into ‘compliance’ with our New World order overlords. The technology will utilize a combination of HAARP transmitters, GWEN towers, microwave cell phone towers, and the High Definition Digital TV.
MIND CONTROL:  Dithering
Mind control via electronic manipulation – Jim Stone
 
So I have covered here three different ways frequencies can be used to manipulate the mind. The first is through the manipulation of a video signal. The second is manipulation of an audio signal, and the third, and worst, is to beam it straight into your head. And the psychological warfare is extremely cruel surrounding this as well. “tinfoil hat” has been used as a phrase to designate “crazies” because uncovering any great conspiracy HAS TO BE DEFINED AS “CRAZY” or the game is up.
 
The brain is a computer, and like a computer it has a clock frequency that all thoughts, your existence, is centered around. This is a little basic because your brain in reality has multiple simultaneous clock frequencies which interact with each other and serve different purposes for biological function, whereas a microprocessor normally has only one central clock that everything in it synchronizes with. For example, your visual cortex may process at a different frequency than the section of your brain which regulates your heart beat. Feelings and thoughts will run at another frequency.
 
Because your brain is an ultra parallel computer, it can accomplish a lot while using frequencies that are far lower than would be practical in a microprocessor, and these frequencies are in the ELF (extended low frequency) range.
 
The fact that your brain operates on frequencies leaves it open to manipulation via electronic means. Since different moods are reflected by different frequencies, it is possible to electronically force people to be relaxed when they should be angry, laugh when they should be appalled, and give loyalty when they should rebel. There are a number of ways that this can be accomplished, and this report will touch on a few of them.
 
The switch to digital television was unprecedented, rapid, and illegal. It was a direct violation of long established standards regulation, which, by the book, required backwards compatibility with legacy devices. It was illegal because it FORCED stations to change format, whether they wanted to or not. Television was not the same as computers, where standards can change in a day and be perfectly legal, because television utilized the electromagnetic spectrum – VHF and UHF, and there were long standing laws in place which clearly stated that there would be no forced changes permitted with regard to how the well established radio frequency bands were used. IF a station, under its own free will CHOSE to start broadcasting digital only, that was up to them, and would have been permitted. The illegal aspect of the switch was the fact that it was forced on everyone, wanted or not.
 
The method –
If you look closely at any mid tone area on the screen (an area that is not totally white or totally black, and this will move around the screen depending upon the scene) you will notice a snow effect, which on average makes a perfect picture, but the picture itself is really in fact a subtly modulated “snow storm” where the “snow” always takes upon itself the color of whatever the image is supposed to be in that spot. Gray areas are by far the best place to look for this. The snow will be moving and modulating and circling at the frequency that triggers whatever feeling they want you to have for whatever is on the screen. Keep in mind that there should be NO SUCH THING AS SNOW IN A DIGITAL PICTURE, yet it is there. It is not in all broadcasts. I suggest you observe the screen during any program where they are bragging about being Jewish, are pushing a gay agenda, or are airing a political topic – especially campaign ads and politically weighted news. Anything of a political nature.
 
How to observe the screen –
The effect is not obvious. You have to get tricky to see it. So go beneath the TV, up very close to it, at an angle where the picture does not show right. You have to be able to see the sub tones only. And THEN you will see the snow. Computers will do the color shift as well. Take your (LCD) computer screen, for practice before trying it on a big clumsy LCD television, and tilt the screen back until you see a shift in the way the colors are displayed. Many of you have already noticed this. It is at that angle you have to look at the TV, from below and not the side. This will not work on a plasma TV.
 
Back in 2004, technology was more advanced than it is now. Therefore, my Toshiba laptop I had back then had a better screen, with full 24 bit color resolution, which featured 8 bit color for each of the color channels. This enabled it to display 16.7 million colors, and as a result there was no need for an early 1990’s technology called dithering to be used to prevent the screen from pixelation due to lack of ability to display a separate color for each pixel. Dithering is a random scattering or movement of pixels to simulate the presence of a greater ability to display color.
 
But when Windows 7 came out, instead of advancing on to 12 bits per color channel (which would have made 36 bit color instead of the 24 bit color we had in the late 90’s,) we had to step backwards to six bits per color channel because we just could not produce a video chip for an LCD screen that was capable of doing it anymore.
 
Folks, they sabotaged the screens. Keep in mind that this sabotage coincided precisely with the release of Windows 7 and the forced switch to digital television, which was totally illegal in the way it was carried out. This sabotage gave them a “reason” to put a modulation effect called dithering into every computer display, an effect which can no doubt be used for mind control.
 
I am going to show you a little math. I will keep it simple and not do any binary (even though that is simple if you just sit down and rationalize it out). But since everyone reading this understands base 10, I will do the math in base 10, and you will just have to trust my knowledge of binary.
 
8 bits of binary will represent 255 different values, plus zero, for a total of 256, including zero. Six bits of binary can represent 63 different numeric values, plus zero, for a total of 64. So by dropping the displays from 8 color bits per channel to 6 color bits per channel, they took a display that was capable of 256X256X256 colors, for a total of 16.7 million colors, and made it into a display that was capable of 64x64x64 colors, for a total of 262,000 colors. For the most part, the most basic of all displays nowadays has a resolution of 1366X768. 1366 X 768 = 1,049,000 pixels. So the most basic of all monitors on the market now, with six bit color depth, can only display 1/4th of the needed colors for it’s resolution. This means you HAVE TO modulate the pixels with dithering, especially on a nice screen which displays at 1920X1080, which equals 2,073,000 pixels or you will get a blotchy or grainy off colored look to any color picture displayed on the screen.
 
Why would they willfully choose to have all displays take a quantum leap backwards (in this case approximately 12 years) when there was no feasible economic reason to do it? LCD technology is old now, there is no reason to be stuck in the last century with it, unless, of course, you wanted to make an EXCUSE and provide a VENUE through which a mind control effect could be added to any online content or offline program. Digital television provided them with a way to bypass the NTSC limitations and lunge forward with full on mind control embedded in a picture, and having a computer be a refuge from this simply would not do. Now we have irritating noisy screens, and there is no rational reasonable explanation for it other than clandestine intent. And it is interesting that the new Mac Books do not do it, only PC computers do. Why? Ask Microsoft.
 
Two years ago we had 8 bit color depth per channel. Now we have 6 bit color depth per channel. And there are three channels. Three channels with six bits of color depth each = 666, and that’s just perfect for the luciferian cabal in power, at the Bilderberg conference where what the little people are going to have gets decided on. Want to know what REALLY CAME OUT OF BILDERBERG? It’s six bit per channel color depth, when public choice, the true free market, would have driven it upward to 12 instead of downwards. And why? It’s because it gave them a plausible explanation for the modulations on the screen that many would notice, and some GEEK would just stand up and say, OH, don’t worry, it’s just DITHERING. And with that big word as an explanation, everyone would just shut up. Shut up and forget about the 80’s and 90’s, where it would have actually been needed. And if anyone wants to argue this I suggest first grabbing a Windows XP laptop and try to find this effect. Try to find it on a 10 year old laptop. That ought to make you wish for the good old days.
 
Nowadays, your “urgent windows update” could be nothing but a new dithering algorithm that is based upon your psychiatric “needs” as defined by an elite few, a decision based upon what you read, surf, write.
 
Other things to look for – They can also simply flicker the entire screen in a subtle way (this would be with a TV only because with a computer it would be too obvious). To observe this, turn off all the lights and leave the room the television is in, and while able to see into the room the television is playing in, but not able to see the TV itself, turn to the side and observe the light coming from the TV with your peripheral vision, which is sensitive to flickering. If they are modulating the entire screen, you should be able to see it this way, and it will be a very rapid and even flicker, like a fast strobe. I would expect this to not be as commonly used, but used sparingly when it is needed most to form public opinion, like after a terror attack. Obviously strobing the entire screen is more effective than the snow approach, but it is also a lot riskier. Fortunately for them, during emotional times like after 911, people are very unlikely to notice because they are too caught up in the event. 
 
How a Ghz signal can be used to interface directly with the brain
All frequencies have a penetration depth, and typically, in water, you will hit 100 percent attenuation at one half wavelength. For a 1 GHZ signal, this will be approximately 7 inches. Most people will write that when microwaves hit water they turn into heat. But there is another step, that description is too simplistic. In reality, when any electromagnetic wave gets absorbed into a conductive medium, it does so by turning into electricity, which shorts itself out in the conductive medium, and the resulting current flow is what causes the heating. A radio antenna is tuned to approximate the frequency that is most expected and therefore rather than short out within itself, it passes the frequencies to the tuner amplifier.
 
So now we know how an electric current can be induced into the brain via a 1 GHZ radio signal, which will fully absorb at a depth of approximately 7 inches. Obviously then, higher frequencies with shorter wavelengths can be used, because you do not need 7 inches of penetration depth. For practical application, the frequency range is between 500 MHZ and 3 GHZ.
 
We have not yet answered the question of how such a high frequency can interface with the brain. It cannot. However, there are different types of modulation you can put on a wave form, and the two most common are AM and FM. For the purpose of interfacing with the brain, we will be discussing AM.
 
Amplitude modulation involves the use of a fixed frequency wave form called a carrier, which has its intensity increased and decreased. An amplitude modulated wave form appears to change it’s height on an oscilloscope while maintaining it’s frequency. If you have a very low frequency AM modulation on a high frequency carrier you can watch the amplitude of the carrier go to max on an oscilloscope, and then drop, all the way to flatline before returning to maximum if the modulation is strong enough and the modulating frequency is low enough to not just look like a blur.
 
So earlier, I established how you can use a radio wave to deliver electricity. Now, take that ghz wave form from a cell tower, which will penetrate approximately seven inches into the skull and put unintelligible high frequency electricity there, and modulate that unintelligible frequency with an ELF frequency the brain can interface with. Bam – o, you get cell phone tower induced mind control. And it’s a piece of cake, it works better than any other method, you see,
 
If you transmit an ELF wave form by itself, it will need a many miles long antenna to pick it up properly, it will not interface with the body very well because your body is not a big enough antenna for the ELF wave to efficiently “short out” in. You would need a really intense signal to do anything. But if you can take that ELF frequency and use it to modulate a super high frequency carrier, that carrier will drop all of it’s energy directly into your skull, and let the modulation of that energy do the rest. Of course, there are other factors, like a single side or asymmetric carrier, but to avoid getting too complex I have said enough here to give you the idea and certainly enough to put an evil genius on the right path.
 
The following video shows this being done to some test monkeys a little way in. Obviously in this case, the power levels are very high. Unfortunately the video has a bit of a crazy aspect to it, and it is very outdated, which is to be expected with anything of this nature that is actually allowed to stay online.
http://youtu.be/kihgLtCKuyU
 
This is a serious topic.
In America, computer wifi is limited to 20 milliwatts transmit power and often even with that tiny amount you can connect from hundreds of feet away with no special antennas or hardware. Your cell phone can transmit 300 milliwatts. That’s well over 10 times the power, and the range of your cell phone is that much better. All that is needed to make a great cellular node is a 10 watt transmitter (to make sure it gets real good penetration into the surrounding buildings,) and a receiver that is more sensitive than the one in your cell phone because you are talking back with a lot less than 10 watts.
 
10 watts is 500 times as strong as your wireless N router that comes in perfect everywhere. A lucky neighbor might snag your unsecured router with only 20 milliwatts of output from over a block away with just a cheap netbook. Why then, since 10 watts will clearly do the job, are there these ENORMOUS out in the open giant goose invading “cell towers” in America that are obviously capable of pumping many thousands of watts?  They always seem to have a 400KVA or bigger transformer feeding them. 400KVA is approximately 400,000 watts.
 
Why pump so many watts?
The antenna arrays on the cell towers are highly directional. That’s obvious. So since the signal from them is confined to a zone, rather than going out omnidirectionally, whatever is in that zone will get extremely high R.F. levels. Maybe you need that much for mind control, but I seriously doubt it. With such an ability to confine the signal to within a zone, I would expect a mind control beam to not need more than a couple thousand watts. Where is the rest of that power going? It could be diverted and sent elsewhere, to another country, for political purposese, because a neighboring cell tower can be synchronized in such a way that it steers the output from surrounding towers to a new remote area. And that is how Haarp works.
 
I also received the comment: “how do the elite prevent themselves from getting beamed”? That answer is easy. The elite live in tight little enclaves that are pretty much set apart from the rest of society. Keeping the happy ray off them is as easy as simply not having the local cell tower deliver it to their isolated little pocket.
 
Audio noise modulation, and “poppers”
During the Iraq war, America seized control of all the Iraqi transmitters, and started broadcasting propaganda. Normally, people would reject it outright. But America knew this, so under every broadcast they put a layer of noise. They did nothing to the audio people listened to, but they modulated the background noise prevalent in any radio signal (and in these broadcasts the injected noise was higher than usual, but not extreme,) and to get the Iraqis to accept what was being broadcast, even though often it was an obvious lie, the injected noise in the radio signal was modulated with a waveform that put people’s brains into a mode of acceptance, and it worked spectacularly well.

But that was not enough to satisfy American desire, so, they dropped AM modulated microwave transmitters called “poppers” onto the rooftops and into various areas where they were not likely to be discovered. Soldiers were usually put in place to guard them. If the “poppers” were discovered, and anyone tried to de-activate them they would be shot. These worked even better than the noise modulated radio signal, and the Iraqis, who had never been exposed to such manipulation knew something was up and absolutely hated them. They figured out that the “poppers” emitted a mind control beam. But after long enough exposure, because they would be killed if they messed with the devices, they eventually succumbed and complied.

CELL PHONE DANGER:  Best Video Ever

Cell Phone Carriers Do NOT Want You To See This! - Cell Towers Exposed!

TI SELF-HELP:  Perps hurt us with words-How to think about it.
 
This advice is for normal people but you can find something in it that can help you as a TI.
 
1. It usually isn’t about you
Hurt people hurt people (as a friend of mine use to say). People who are saying these words to us usually are experiencing a negative emotion themselves, which is causing them to hurt on the inside. Some people are able to process that pain, but people often react to it before responding appropriately; lashing out at others, taking a higher or lower position relative to others, and sometimes saying unskillful things out of anger.
 
2. Words mean different things to each of us
We are all trying our best to communicate these mysterious sensations in our bodies called emotions using an agreed upon means of communication (language). Language is nuanced, complex, and not universal. We all have different meanings and value we place on certain words. Some words for us have more emotional charge than others because of what we’ve experienced in the past or connotations we have heard them used in.
 
3. Words can’t hurt you without your permission
In one of Buddha’s stories, he encounters an evil man who tried to verbally assault, ridicule and demean him. But then, without success, he gave up. When he asked the Buddha why he didn’t react, the Buddha responded, “If you offer me a gift and I do not respond, to whom does the gift belong?” People can offer us their words or opinions, it can’t hurt us unless we let it first land in our heart and mind.
 
4. Allow yourself to feel your reaction
So if you’re human, you’ve likely allowed the words to land and hurt you. Emotions are largely uncontrollable to the extent that they will occur whether we want them to or not. As I’m learning, however, this doesn’t mean you have to act on the emotions that are arising. Rather, it is okay to simply watch them come up, fill your body, and eventually they will dissolve. A reaction to them happens, only because we don’t have the self-awareness and presence of mind to stop ourselves from reacting, and instead, witnessing the emotion rising and falling.
 
5. Notice the wound inside
The words and opinions land, they have hurt you, and you unfortunately forgot to just witness them and abruptly reacted to the other person, perhaps throwing a few resentful and hurtful words back at them. Now what? A great suggestion I received was to notice the wounded place in each of us.
Notice that the person who is saying these words to you is speaking from a wounded place, and notice your reaction to them is from your own wounded place. In their wound, perhaps they have an unmet need, unfulfilled expectation, or past unresolved trauma that is causing them to react in this way; perhaps they weren’t loved, didn’t have good role models, or were spoken to in an abusive way. The point is the disappointment and hurt they feel is coming from somewhere, so try to understand it and empathize.
 
6. Speak your truth
By being able to see the wounded place in the other, we are then able to see the wounded place in ourselves. Why did that person’s words hurt you? I believe that people give us pain in order to help us heal the unhealed parts of ourselves so we can become stronger. We must look into our own wounds to see where they stem from, why what the other person is saying to us is affecting us, and look for what we can learn from this. Usually, they are just digging into a wound that already exists. So instead of making them liable for the entire wound, I find it is more valuable to look at your wound and honestly share with them where it came from, why what they are saying to you isn’t helping you to heal that wound, and what you need to do so.
 
7. Put both wounds on the dissection table
With a view to the other person’s wounded place, and a gentle approach to your own, you are then able to put both your and the other person’s wound out on the table. Together, you are able to look at your own, and theirs, from different angles, for the purpose of fostering understanding and acceptance.
 
We all have wounds, and often words and the way people say them unintentionally hurt us. Looking at them together helps build, forgive, and move on from the words that were said. Once we get to the root of our wounds, we often see that we all have wounds, and we are all innocent for holding on to them, not forgiving those for causing them, and not ever having the opportunity to heal them.
 
8. Practice more daily self-love
This is the means building self-awareness, compassion, and acceptance. When we can love and accept ourselves so fully and deeply, we are able to step into our power. With this heightened sense of our truth, nothing anyone says can affect us. We are able to better discern our emotions and respond appropriately instead of reacting, foster harmony versus conflict, and heal ourselves of our past.
 
9. You always have a choice.
They say you are the average of the 5 people you spend your most time with. If someone in your life isn’t adding value, and regularly bringing you down with their words, maybe it is time to consider changing your environment and distancing yourself from them. I have had to remove these people who are “energy vampires” from my life in the past, not necessarily because of them, but also because I deserve peace.
 
10. Keep becoming the expert of yourself
If we know ourselves, including the beautiful parts and the ugly wounds, no one’s words can ever affect us. Healing is an ongoing journey, and it takes work. Wounds don’t just go away, and growth happens with a lot of experimentation, many attempts at changing our values and beliefs, and a willingness to adopt a new way of looking at ourselves and the world around us. Trust that you’re on your path, keep practicing these steps (or your own), and be proud of yourself for growing towards the best you can be for yourself and for others.
TI HEALTH:  Cleanses

WHISTLEBLOWER CONTACTS IAHF WITH INSIDE INFO ON CHEMTRAILS: HOW TO DETOX & PROTECT OURSELVES

A whistleblower going by the name "Dr.Ian Revson" operating from inside a major defense contractor where he works as a pharmacologist in bioinformatics posts on Curezone under the name "sunver". See http://curezone.org/forums/fm.asp?i=1206933
 
He is writing an e-book about the immense threat posed by chemtrails and needs help disseminating information in advance of finishing his book to help protect his life. Here is a sample from one of Revson's articles:"'CHEMTRAILS' are a component of an integrated atmospheric weapons system, which has multiple purposes, including weather modification, population control, advanced surveillance, biological warfare, and artificial intelligence. In North America and Europe, the program is run under the auspices of the Pentagon and NATO, obviously with help from the American and European defense contractors (Lockheed Martin, Northrop Grumman, Raytheon, Boeing, EADS, Honeywell, etc). Many others are involved (Monsanto).
 
1) 'Chemtrails' are presently in operation for weather modification (disaster induction).
 
2) 'Chemtrails' contain nano-engineered biologics. This is a weaponized parasite. Host saturation is 99%+ . This means we are all infected. Infection includes intracellular anomalies in both human macrophage and RBC (red blood cell), apparent soft tissue fungal infection, and 'de novo' synthesis of novel foreign protein crystals."

ACTIVIST:  Mike Mason
ACTIVIST ELLA-Another Ella
Ella Baker was a Civil Rights Activist
Biography:  https://www.biography.com/people/ella-baker-9195848
 
Podcast
Tuesdays and Thursdays 9:00 pm Eastern/6:00 pm. Pacific
Talkshoe Phone:  724-444-7444, Enter 141476#, pin 1#
 
Freedom for Targeted Individuals International Call:
Saturday 7:00 PM Eastern/4:090 pm Pacific
New Time for June:  4:00 pm Eastern/1:00 pm Pacific
Uber 541-725-1132
 
Spiritual Thoughts: Words of Comfort
  Proverbs 16:
 
 
3 Commit thy works unto the LORD, and thy thoughts shall be established.
 
4 The LORD hath made all things for himself: yea, even the wicked for the day of evil.
 
6 By mercy and truth iniquity is purged: and by the fear of the LORD men depart from evil.
 
7 When a man's ways please the LORD, he maketh even his enemies to be at peace with him.
 
8 Better is a little with righteousness than great revenues without right.
 
12 It is an abomination to kings to commit wickedness: for the throne is established by righteousness.
TARGETED INDIVIDUAL COMMUNITY CONFERENCE CALLS
Sunday
 
Moderator:  Neal
Citizens Against Harmful Technology
Time:  8:30 p.m. Eastern
Talkshoe:  744-4444, 134999
 
Moderator:  Renata
Time:  3 p.m. Eastern
Talkshoe:  744-4444, 114616
 
 
 

 
Thursday
 
Moderator:  Ella
Time:  9:00 p.m. Eastern
Talkshoe:  744-4444, 141476
 
Moderator:  Kyle
Time:  After Ella’s call
Talkshoe:  744-4444, 142394
 
Moderator:  Mike Mason
Time:  6:00 pm Eastern
Talkshoe:  744-4444, 116202
 
Monday
 
Moderator:  Derrick
Time:  9:00 p.m. Eastern
Free Conference:
319-527-2701, Code 248671
 
Moderator:  Mike Mason
Time:  6:00 p.m. Eastern
Free Conference:  641-715-0632,
Code 116202
 
 
Friday
 
Moderator:  Linda
John W:  92703
Time:
On Reverse Engineering Mind
Control Technologies
Talkshoe:  744-4444, 14009
 
Moderator:  Beth
Time:
Talkshoe:
 
Tuesday
 
Moderator:  Ella
Time:  9:00 Eastern
Talkshoe:  744-4444, 141476
 
Moderator:  Kyle (Vulcan Wolverine)
Time:  After Ella’s call
Talkshoe:  7444-444, 142394
 
 
 
 
 
 
 
 
Saturday
 
Moderator:  Dr. Millicent Black
Church Conference Call
Time:  6:00 pm Eastern
Talkshoe:  140567
 
Moderator:  Ella
Freedom for Targeted Individuals
International Activism
Time:  7:00 pm Eastern
Free Conference:  541-275-1131
 
Moderator:  Lauron
Human Trafficking
Time:  11:00 pm. Eastern
Talkshoe:  142124
Activism/Support Groups
Denver, Colorado
Area Support Group
Contact:  Xontu Garcia
Email:  xontu44@icloud.com
 
Atlanta, Georgia
Support Group Meeting

Contact:  Carol Dimas
Phone:  470-312-6578
Email:  jamesdimas45@gmail.com
 
Chicago, Illinois
The Chicago area Support Group – Illinois, Indiana, Wisconsin
Location: Hammond Public Library
564 State Street
Hammond, Indiana
  Contact Shavon at von.pray@gmail.com

or Candace at cam14395@aol.com
 
New York City Support Group
Contact:  Angel Acevedo
Email:  sorasuarez6@gmail.com
Phone: 646-806-8654
 
Houston, Texas
  For more information, you may contact
  Tereza Dutta - terezaxdutta@gmail.com

  
Seattle, Washington
Location: Broadview Branch Library at:

12755 Greenwood Ave. N.
Seattle, Washington 98133-7901

For more information, you may contact
Laura Solway - 206-365-6139
Curtis Kimble – 817-901-8720
 

Portland, Oregon
Saturday, July 1, 2017

3:30-5:00 PM
Hollywood District Public Library
4040 Northeast Tillamook
Portland, Oregon
Contact person;  Amy – 971-207-3401
 

 
South Carolina
  For more information, you may contact
  Gail - mhisinhim4evr@gmail.com

 
TI'S IN CHINA
An Announcement To The Whole World By Chinese Victims
Of Electronic And Psychotronic Weapons

SHIELDING:  Linqstat
A Linqstat order is here. If you are interested, please email Neal to order. electricrose22@yahoo.com
 
If you have a tent, you can just tape some pieces of Linqstat together and drape them over the tent. You could make it the exact shape as the rain cover. You can ground it to an outlet, to a ground with a banana clip or attach a TENS electrode to it to create an energy field through the material. Using a tent structure that's already got places to attach the Linqstat make it a lot easier. You can even get a simple one and put it on your bed to drape the Lingstat over. Completely covering an already-made tent like this one with Linqstat is pretty easy and you can just put the TENS pad on the outside of it and "light it up", keeping the frequencies on the outside.
                      LINK TO GROUNDING CLIPS
Newsletters
June 18, 2017           https://www.mynewsletterbuilder.com/email/newsletter/1413044960
 
June 11, 2017           https://www.mynewsletterbuilder.com/email/newsletter/1413040968
 
June 4, 2017             https://www.mynewsletterbuilder.com/email/newsletter/1413030644
 
 
May 28, 2017             https://www.mynewsletterbuilder.com/email/newsletter/1413026066
 
May 21, 2017             https://www.mynewsletterbuilder.com/email/newsletter/1413021020
 
May 14, 2017             https://www.mynewsletterbuilder.com/email/newsletter/1413003854     
 
May 7, 2017                https://www.mynewsletterbuilder.com/email/newsletter/1413003786
 
 
April  1, 2017               https://www.mynewsletterbuilder.com/email/newsletter/1412978182
 
April 23, 2017                https://www.mynewsletterbuilder.com/email/newsletter/1412969942
 
April 16, 2017              https://www.mynewsletterbuilder.com/email/newsletter/1412952886
   
April 2, 2017                https://www.mynewsletterbuilder.com/email/newsletter/1412937668

 
March 26, 2017            https://www.mynewsletterbuilder.com/email/newsletter/1412932370
 
March 19, 2017            https://www.mynewsletterbuilder.com/email/newsletter/1412926716
 
March 12, 2017            https://www.mynewsletterbuilder.com/email/newsletter/1412921638
 
March 5, 2017              https://www.mynewsletterbuilder.com/email/newsletter/1412908194
 
 
February 26, 2017        https://www.mynewsletterbuilder.com/email/newsletter/1412903686
 
February 19, 2017        https://www.mynewsletterbuilder.com/email/newsletter/1412897936
 
February 12, 2017        https://www.mynewsletterbuilder.com/email/newsletter/1412892880
 
February 5, 2017          https://www.mynewsletterbuilder.com/email/newsletter/1412873198
 
 
January 29, 2017          https://www.mynewsletterbuilder.com/email/newsletter/1412863308
 
January 22, 2017          https://www.mynewsletterbuilder.com/email/newsletter/1412859022
 
January 15, 2017          https://www.mynewsletterbuilder.com/email/newsletter/1412850596
 
January 8, 2017            https://www.mynewsletterbuilder.com/email/newsletter/1412840908
 
January 1, 2017            https://www.mynewsletterbuilder.com/email/newsletter/1412828054
 
 
December 18, 2017       https://www.mynewsletterbuilder.com/email/newsletter/1412819558
 
 
October 9, 2016            http://www.mynewsletterbuilder.com/email/newsletter/1412728854
 
October 2, 2016            http://www.mynewsletterbuilder.com/email/newsletter/1412721414
 
 
September 25, 2016      http://www.mynewsletterbuilder.com/email/newsletter/1412711414
 
September 18, 2016      http://www.mynewsletterbuilder.com/email/newsletter/1412700914
 
September 11, 2016      http://www.mynewsletterbuilder.com/email/newsletter/1412695944
 
September 4, 2016       http://www.mynewsletterbuilder.com/email/newsletter/1412692718
 
 
August 28, 2016           http://www.mynewsletterbuilder.com/email/newsletter/1412684952
 
August 21, 2016           http://www.mynewsletterbuilder.com/email/newsletter/1412679272
 
August 14, 2016           http://www.mynewsletterbuilder.com/email/newsletter/1412672734
 
August 7, 2016             http://www.mynewsletterbuilder.com/email/newsletter/1412670116
 
 
July 31, 2016               http://www.mynewsletterbuilder.com/email/newsletter/1412667822
 
July 24, 2016               https://www.mynewsletterbuilder.com/email/newsletter/1412656346
 
July 17, 2016               https://www.mynewsletterbuilder.com/email/newsletter/1412654598
 
July 10, 2016               http://www.mynewsletterbuilder.com/email/newsletter/1412656346
 
July 3, 2016                http://www.mynewsletterbuilder.com/email/newsletter/1412648084
 
 
June 26, 2016             http://www.mynewsletterbuilder.com/email/newsletter/1412645586
 
June 19, 2016             http://www.mynewsletterbuilder.com/email/newsletter/1412640846
 
June 12, 2016             http://www.mynewsletterbuilder.com/email/newsletter/1412635390
 
June 5, 2016              http://www.mynewsletterbuilder.com/email/newsletter/1412632520
 
 
May 29, 2016             http://www.mynewsletterbuilder.com/email/newsletter/1412626348
 
May 22, 2016             http://www.mynewsletterbuilder.com/email/newsletter/1412626330
     
May 15, 2016             http://www.mynewsletterbuilder.com/email/newsletter/1412615204
 
May 8, 2016               http://www.mynewsletterbuilder.com/email/newsletter/1412612962
 
May 1, 2016               http://www.mynewsletterbuilder.com/email/newsletter/1412608314
 
 
April 24, 2016             http://www.mynewsletterbuilder.com/email/newsletter/1412604122
 
April 17, 2016            http://www.mynewsletterbuilder.com/email/newsletter/1412615204
 
April 10, 2016            http://www.mynewsletterbuilder.com/email/newsletter/1412595488
 
April 3, 2016              http://www.mynewsletterbuilder.com/email/newsletter/1412594890
 
 
March 27, 2016          http://www.mynewsletterbuilder.com/email/newsletter/1412590396
 
March 20, 2016          http://www.mynewsletterbuilder.com/email/newsletter/1412578970
 
March 13, 2016          http://www.mynewsletterbuilder.com/email/newsletter/1412573746
 
March 6, 2016            http://www.mynewsletterbuilder.com/email/newsletter/1412572388
 
 
February 28, 2016      http://www.mynewsletterbuilder.com/email/newsletter/1412572982
 
February 21, 2016      http://www.mynewsletterbuilder.com/email/newsletter/1412563986
 
February 14, 2016      http://www.mynewsletterbuilder.com/email/newsletter/1412557150
 
February 1, 2016        http://www.mynewsletterbuilder.com/email/newsletter/1412553550
 
 
January 24, 2016       http://www.mynewsletterbuilder.com/email/newsletter/1412545396
 
January 17, 2016        http://beta.mynewsletterbuilder.com/email/newsletter/1412540862
 
January 10, 2016        http://beta.mynewsletterbuilder.com/email/newsletter/1412539652
 
January 3, 2016          http://beta.mynewsletterbuilder.com/email/newsletter/1412531748
 
 
December 27, 2015     http://beta.mynewsletterbuilder.com/email/newsletter/1412531462
 
Disclaimer
The information provided on this web site and those it links to, including embedded videos and other content from other web sites, is for educational purposes only. The information and products made available through this web site are not intended to provide medical advice, diagnose, treat, or cure any health conditions, or be construed as a therapeutic recommendation or prescription for any disease or symptom. The US Food and Drug Administration has not evaluated products or statements about specific products, health topics, or any suggested methods presented. Viewers should not attempt self-diagnosis or self-treatment of any kind, and should not discontinue any medication or therapy or make any health-related decisions without the advice of a licensed medical physician. You should consult with a physician or healthcare professional before starting any diet, exercise, or supplementation program, before taking any medication or nutritional supplement, or if you have or suspect you might have a health problem. Each person is different, and the way you react to a particular product may be significantly different from the way other people react to such product. You should consult your physician or healthcare professional regarding any potential adverse interactions between medication you are currently taking and nutritional supplements before taking any such supplements. Citizens Against Harmful Technology disclaim any liability, loss, or risk incurred, directly or indirectly, as a result of the use and application of the contents of this site. If you are unwilling to be bound by this disclaimer, you should not view this site or newsletter. 

Citizens Against Harmful Technology Inc.  •  P. O. Box 000000  •  New Smyrna Beach, FL 32141

http://CitizensAHT.org

Subscribe  •  Preferences  •  Send to a Friend  •  Unsubscribe  •  Report Spam
Powered by MyNewsletterBuilder
Share on Facebook Bookmark and Share