The United Nations an International Organization in 1945: "The US and Soviet Union are now among the chief artisans of the New International Order."
19 june 1964 Memorandum Subject: Soviet Research and Development in the field of direction and control of human behavior
Current research indicates that the Soviets are attempting to develop a technology for controlling the behavioral patterns among the citizenry of the USSR in accordance with politically determined requirements of the system.
This guy says V2K is "frequency that is heard only by the unconscious mind, thereby passing the body's defenses, and embeds a message electronically and it can place someone's voice inside your head." This is a very simplistic view of the technology which can actually be performed at least 9 different ways as brought up by a TI who sent me an email with links and pictures to these various methods in the next article. Different people have different ideas of what V2K is, based on what they have been exposed to in the way of patents and technology, but the one thing understood by everyone is that a person hears things that others don't. The method of making this happen can vary depending on the tech used to create the voice. Subliminal messaging may use similar methods but V2K is an actual voice "heard."
PATENTED VOICE TO SKULL MIND CONTROL TECHNOLOGY EMBEDDED IN 5G TECH
Recently I has approached by a self-described “insider” who had at one time worked for DARPA. He insisted that the new 5G technology being rolled out across the country was both lethal and contained mind control elements that should alarm all people. I thought the claims were outrageous and with scientific justification. Don’t misunderstand me, I know that mind control exists, however, 5G being an element of mind control surprised me. Subsequently, I began a literature search and I found the mother load. Subsequent to my search, I found the patentthat should scare the hell out of all Americans.
“United States Patent 6,017,302 Loos January 25, 2000 Subliminal acoustic manipulation of nervous systems Abstract: In human subjects, sensory resonances can be excited by subliminal atmospheric acoustic pulses that are tuned to the resonance frequency. The 1/2 Hz sensory resonance affects the autonomic nervous system and may cause relaxation, drowsiness, or sexual excitement, depending on the precise acoustic frequency near 1/2 Hz used. The effects of the 2.5 Hz resonance include slowing of certain cortical processes, sleepiness, and disorientation. For these effects to occur, the acoustic intensity must lie in a certain deeply subliminal range. Suitable apparatus consists of a portable battery-powered source of weak subaudio acoustic radiation. The method and apparatus can be used by the general public as an aid to relaxation, sleep, or sexual arousal, and clinically for the control and perhaps treatment of insomnia, tremors, epileptic seizures, and anxiety disorders. There is further application as a nonlethal weapon that can be used in law enforcement standoff situations, for causing drowsiness and disorientation in targeted subjects.It is then preferable to use venting acoustic monopoles in the form of a device that inhales and exhales air with subaudio frequency. Inventors: Loos; Hendricus G. (Laguna Beach, CA)Family ID:25505170Appl. No.:08/961,907 Filed:October 31, 1997…
The patent goes on to further describe the workings of this acoustic technology.
Experiments have shown that atmospheric acoustic stimulation of deeply subliminal intensity can excite in a human subject the sensory resonances near 1/2 Hz and 2.5 Hz. The 1/2 Hz resonance is characterized by ptosis of the eyelids, relaxation, drowsiness, a tonic smile, tenseness, or sexual excitement, depending on the precise acoustic frequency near 1/2 Hz that is used. The observable effects of the 2.5 Hz resonance include a slowing of certain cortical functions, sleepiness, and, after long exposure, dizziness and disorientation.
According to my inside source, that when the brain reaches the 2.5Hz, it is vulnerable to implantation of ideas and suggestions for behavioral modification. I was stunned when I found this passage in the description section of the patent because it matched what I was told by the former DARPA source.
The finding that these sensory resonances can be excited by atmospheric acoustic signals of deeply subliminal intensity opens the way to an apparatus and method for acoustic manipulation of a subject’s nervous system, wherein weak acoustic pulses are induced in the atmosphere at the subject’s ears, and the pulse frequency is tuned to the resonance frequency of the selected sensory resonance. The method can be used by the general public for control of insomnia and anxiety, and for facilitation of relaxation and sexual arousal.
Based upon the above description, we are seeing acute and dramatic behavioral modification as a result of this technology.
Clinical use of the method includes the control and perhaps a treatment of anxiety disorders, tremors, and seizures. A suitable embodiment for these applications is a small portable battery-powered subaudio acoustic radiator which can be tuned to the resonance frequency of the selected sensory resonance.
The significance of the behavioral modification potential of this technology is dramatically described in the preceding paragraph. The following paragraph of the patent description, explains how this technology can be used at a distance.
There is an embodiment suitable for law enforcement operations in which a subject’s nervous system is manipulated from a considerable distance, as in a standoff situation.Subliminal subaudio acoustic pulses at the subject’s location may then be induced by acoustic waves radiating from a venting acoustic monopole, or by a pulsed air jet, especially when aimed at the subject or at another material surface, where the jet velocity fluctuations are wholly or partly converted into static pressure fluctuations. The described physiological effects occur only if the intensity of the acoustic stimulation falls in a certain range, called the effective intensity window. This window has been measured in exploratory fashion for the 2.5 Hz resonance.”
The ability to embed mind control into the 5G range is discussed in the patent:
The very low frequency waves needed for the acoustic stimulation of the vestibular nerve may also be provided by a sound system in which weak subaudio pulses are added to audible audio program material. This may be done in the customary manner way of adding the currents from these signals at the inverting input of an operational amplifier. The amplitude of the pulses is chosen such that the strength of the resulting acoustic pulses lies in the effective intensity window. Experiments in our laboratory have shown that the presence of audible signals, such as music or speech, does not interfere with the excitation of sensory resonances. The invention can also be implemented as a sound tape or CD ROM which contains audible audio program material together with subliminal subaudio signals. The recording can be done by mixing the audio and subaudio signals in the usual manner. In choosing the subaudio signal level, one must compensate for the poor frequency response of the recorder and the electronics, at the ultra low subaudio frequencies used.
The above paragraph contains a description of what is known as voice-to-skull technology. the process was popularized by Dr. Nick Begich. In his book, Angels Don’t Play This HAARP, Begich describes how he provided the European Union legislature with a personal demonstration of implanting voices into someone’s head in a technological approach, Begich referred to as voice-to-skull technology. The European Union leaders were so stunned, they passed a resolution against the use of the technology.
Unmistakable Referencing to Mind Control
Brain mapping under the guise of research has the strong appearance of being a whole lot more than someone’s laboratory investigation. Consider the very telling excerpt in which project managers state that they want to implant electrodes in hundreds of cell membranes by an army of nan0particles which will allow these nanoparticles to become apart of the cell membrane functioning. The process is descried in the project managers own words:
“…Nanoprobes bearing several dozen electrodes, for instance, could be stacked to probe hundreds of thousands of recording sites and transmit data wirelessly. Alternatively, nanoparticles carrying molecules that bring them to specific cell types could lodge in cell membranes so surgical placement wouldn’t be necessary. The nanoparticles could also carry molecules that can sense electrical activity, pressure, or even certain chemicals revealing brain activity.”
A fully-implantable, cochlear device has been developed for those affected by sensorineural hearing loss. Sensorineural hearing loss occurs when the cochlea cannot functionally convert the sound vibrations to electric stimulation of cochlear neurons.Currentcochlear implantsare secured to bone underneath theskinbehind the external ear and transmit through internal cable to electrodes in the cochlea.The nanotechnology-enabled advance integrates various parts of a cochlear implant onto one chip that can be surgically implanted inside of the ear, spanning from the middle ear to the cochlea. Termed a “system-on-chip” (SoC), the new cochlear implant prototype is 3.6mm x 3.6mm and consists of three main parts: the piezoelectricsensor, sound processing unit, and arbitrary waveform neural stimulator. The piezoelectricsensor, made of the nanomaterial Lead Zirconate Titanate (PZT), is located on the side of the chip that sits in the middle ear and receives acoustic stimuli (sound waves). Thesensor is made of a piezoceramic material that detects pressure variations in the middle ear. Bending of the piezoceramic material in response to the pressure variations creates a change in voltage, and thus sound waves are converted into electric signals. Next, the sound processing unit configures the electric signal for the user and maximizes the energy-efficiency of the system. Finally, an electrode device that receives input from the environment and translates it to neural stimulation, called an arbitrary waveform neural stimulator, directly stimulates cochlear nerve fibers. As the nerve fibers are stimulated, signals are sent to the brain, allowing the user to interpret the original acoustic stimulus as sound. The combination of nanotechnology with electrical devices for a single SoC may prove significant for the development of smaller and smaller devices that can be seamlessly integrated into the human body.
Understanding Wireless Technology What exactly is wireless technology? Digital sound processing has opened up innovative ways for us to manipulate an audio signal. This flexibility allows for the development of logarithms to improve the sound quality of the audio signal, and ways in which those signals can be stored and transmitted. When we're talking about wireless, we're talking about information being transmitted from one location to another. This isn't something new in the industry. In fact, this type of wireless transmission has been available for many years in the form of FM technology. FM technology is an analog transmission, and we still continue to use it to transmit the signal. However, as technology has evolved, so has the way in which we're transmitting it. With digital technology, the norms for wireless transmission have changed.
Converting the Signal Let's review what happens when converting the analog signal to digital within a hearing instrument. The input signal is generated, it hits the microphones, and then is sent to the A/D converter. The A/D converter takes the signal and converts it to a digital signal, which is a series of zeroes and ones. DSP, or digital signal processing, processes the signal. Once the signal has been processed, it has to be turned back into an analog signal because our brains do not decipher digitized signals. The digital to analog converter (D/A converter) converts the digital signal to an analog signal, and then the signal is sent to the receiver and routed into the ear. The A/D converter is a very important part of this process because it deciphers what we're sending to the patient. The A/D converter is part of the hardware of the device. Its task is to convert the continuous analog signal into a digital bitstream that can be processed by the DSP. The digital bitstream is a sample base, which means that the digital representation is square-like instead of smooth. In converting the signal, distortion is added because it is now a square-like signal. The more bits that you have, the more concise that converted signal is going to be. The digital representation of the analog signal is going to be incorrect and distorted. If something is not captured as the signal is converted, we can't provide it to the patient when the processed signal reaches the patient's ear. So, it is important to know what's being picked up by the microphones and going through the A/D converter. If you don't have a good sound quality or good signal going in, you can't have a good signal going out. There are many parameters that can introduce error to this signal, such as input dynamic range, sampling frequency, bit depth, and internal noise. These parameters are taken into consideration when developing an amplification platform. We also take these factors into consideration when we're developing technologies to send and receive signals from other sources. Sending a signal involves coding and the decoding of the signal. Information from sources like a TV or a stereo (or even a hearing device) goes through a very similar process. In all cases, an analog signal has to be converted to digital, and the sample data is coded in a specific way. This is what we call the audio codec. Codec refers to coding and decoding of the information in a wireless transmission going from one antenna, which is typically the transmitter, to another antenna, which is typically the receiver. It's using electromagnetic energy or waves, often referred to as EM waves, to transmit that signal. They have to be paired together so that they can detect the transmitted signal. The signal is then decoded and sent to the hearing device for processing. The signal has to be converted back to analog before it goes to the output of the hearing device. Each of these steps is significant because they can impact how much power is being used and what is being delayed in the sound. If you remember first generation Bluetooth, there was significant delay in the time that the signal reached the receiver, and that can affect the overall sound quality. What is Wireless Technology? There are many options for wireless technology to use with hearing aids and amplification devices, including 900 MHz, 2.4 GHz, near-field magnetic, and Bluetooth. It can get confusing to decipher the terms and technology in order to determine what is most appropriate for our patients. Wireless technology, by definition, refers to electronic products and systems that interact by using electromagnetic energy to carry information between them, thus enabling communication. Electromagnetic energy is used to carry information between two different devices. Wireless hearing devices, in general, use electromagnetic energy, or EM energy. Wireless technology requires a transmitter and a receiver, and not all transmitters and receivers are the same. Electromagnetic energy can be transmitted in two ways: it can be transmitted as a signal (acoustic information), and it can also be transmitted as data. Transmission of information uses acoustic information, not data. With hearing devices, electromagnetic information can be carried via analog or digital technology. Telecoils and FM systems are examples of analog technology, and they are very simply constructed. They don't need a lot of energy, and they tend to work relatively well. T-coils are near-field, while FM has more capabilities for distance, which is referred to as far-field. Hearing aids are now digital, so we're dealing more with the EM energy.
EM waves are electric and magnetic signals merged together to make up the transition so that we can convert some of the signal into sound waves. Wireless transmission is achieved through the use of electromagnetic waves. This is a type of transverse wave, which has both an electric component and a magnetic component.
The EM waves by themselves are not audible unless they are converted into a longitudinal wave. One property of an EM wave is its ease of being modified by another signal. This makes EM waves excellent carriers of data. EM waves cover a wide range of transmission of frequencies, which is what we refer to as the carrier frequency. Everything that travels wirelessly is on a frequency. The choice of the carrier frequency depends on how much information needs to be sent, how much power is available, the transmission distance, and how many other devices are using that frequency. Local laws and regulations may also determine carrier frequencies. You also have to take into account the path of transmission, and things such as mountains or buildings that may be in that path. Higher carrier frequencies can carry more information. For example, a 2000 Hz carrier frequency can carry more data in the same amount of time than a lower carrier frequency like 200 Hz. On the other hand, lower frequencies require less power for transmission. When developing wireless technology applications, there is always a give and take. You have to consider how much energy and how much information you need, and where you are going, in order to determine the best way to transmit that information. When companies come out with more satellites, they come out with more power to transmit a signal further and further, which is why we can now transmit radio all over the world. With hearing devices, power is an important consideration because we want to ensure patients have access to sound at all times.
Radio Frequency What is radio frequency? Every manufacturer uses some type of radio frequency; the carrier frequencies that carry the information are radio frequencies. We use carrier frequencies to share information wirelessly. We allocated carrier frequencies between 3000 Hz and 300 GHz for wireless transmission. There are also designated frequencies for travel over space, which makes them far-field. Examples of far-field are infrared, which has one of the largest transmission distances, microwave, Bluetooth, as well as radar, TV broadcasting, satellite, and cell phone.
Here is an analogy to help explain radio frequency. There are three co-workers that have been tasked to go on a business trip for seven days. All three of them are given the same exact suitcase, and they are going for the same exact time on the same exact plane. They're going from Boston to California and they're told that they have to bring the same amount of clothing: two pairs of black pants, three white shirts, etc. Everything that they have will be exactly the same. Traveler A is a very efficient traveler. She travels a lot, she takes a lot of pride in packing, and she gets ready weeks before her trip. When she packs all of the things into her suitcase, she's able to get everything in there and have extra space. If she needed to put other things in the suitcase or she wanted to take things out, she'd have that capability. Traveler B is also a pretty good traveler, but she's not as good as Traveler A. When Traveler B gets all of her things together and she puts them inside of her suitcase, she can just fit all of those things that she's asked to bring with her. She doesn't have the capability to put anything else in unless she makes the suitcase larger, or she'd have to get another suitcase. Traveler C is not really good at traveling. She did her laundry at the last minute before her trip, and it wasn't dry, so she just threw everything in the suitcase. She had to expand her suitcase because she wasn't able to get all of the articles in there that she was asked to bring. All three travelers have the same suitcase and all have the same things packed in them, but it's the inside that looks different. They get to the airport, and now Travelers A and B are able to put their belongings up in the overhead bin. Traveler C has to now check her bag because it's too big. The same articles are going to the same place, but now Traveler C is going take a little bit longer. They go on the plane, they get to California, they get off. Now all three of the cases are the same. It's just that one takes a little bit longer to get there. The suitcases look the same, but what's on the inside looks very different. With wireless technology, think about what's on the inside, not the package itself. How it is packaged on the inside and the capabilities of it will give you the functionality when it is coding, decoding and sending information.
Wireless Technology Today Near-Field Magnetic Induction (NFMI) Near-field magnetic induction (NFMI) is not new to the industry. It was one of the first ways that wireless technology was used within hearing devices. It is a short range (also called near-field) wireless so you need a gateway or intermediary device, such as a Streamer or similar accessory, to communicate with the hearing instrument. NFMI transmits only to about one meter, but it has very low power consumption. You save about 10 times the battery life with an NFMI system versus a device using 2.4 GHz or Bluetooth because there's less battery drain. It's typically a very fast connection. It is nearly instantaneous and there is less interference or nulls, which is a drop out of sound. It provides a more consistent signal. People choose to use NFMI because of the lower battery consumption and better consistency of the signal. It is typically used in combination with Bluetooth. For example, the audio source sends the signal via Bluetooth to the gateway device (for example, the Streamer), and the gateway device uses NFMI to send the signal to the hearing instrument. In summary, the advantage of NFMI is that there is no delay, low battery drain, and you can transmit through almost anything. Oticon uses NFMI because it uses less power and allows for binaural hearing. Some of the drawbacks are that it has a short transmission distance (one meter) and you have to use a gateway device to connect to anything that is further than one meter. Sound quality can be affected by the orientation of the gateway device and hearing aid receiver coil. Although you can occasionally get some interference with NFMI from magnetic sources such as old computer monitors or fluorescent lights (just like you can with a cellular phone), overall it will provide a more consistent signal.
2.4 GHz The hearing industry also uses 2.4 GHz. 2.4 GHz is simply the carrier frequency; it's not a type of energy or a type of data. It is used to transmit directly to iPhones. Almost anything that's wireless is using some type of 2.4 GHz carrier frequency, such as Bluetooth, cordless landline phones, car alarms, microwaves, video/security systems, wireless data networks, and remote control cars/droids. It has 79 channels, which allows for better transmission of the signal. Bluetooth is a 2.4 GHz transmission. 2.4 GHz is exactly the same from manufacturer to manufacturer. The difference between manufacturers comes down to the implementation; that is, how everything is being converted and what is happening with the signal along the way. The difference in implementation will make a difference in terms of how the signal is going to sound. The advantages of 2.4 GHz include a longer distance signal transmission, therefore a gateway device is not needed. It can be a very robust and reliable connection. There is a high transmission of data and a wide bandwidth. It supports stereo and tends to have low distortion. There's a low delay from the source to the listener, and you have no echo problems or issues with lip synchronization. Lip synchronization refers to how well the audio signal matches a character's lip movements. You may have seen old Spaghetti Westerns where the audio track was out of sync and therefore the sound didn't match up with the character's lip movements. In terms of drawbacks, 2.4 GHz has high battery consumption; it uses approximately 10 times more battery power than NFMI. You also can't share information between ears well with this technology as it can't go through the skull. Sometimes it can have an inconsistent connection; the signal can easily drop. I'm sure most of you have dealt with patients who have 2.4 GHz devices and connection issues. Many patient issues with 2.4 GHz are related to connection issues.
900 MHz There is some technology still in the hearing industry that uses 900 MHz. 900 MHz has only four channels in the US. As mentioned, 2.4 GHz has 79 channels. Comparing 79 channels to 4 channels is analogous to taking a road trip with a choice of highways; one route includes a highway with 79 lanes and the other route includes a highway with 4 lanes. To get to the destination quickest, you would choose the 79 lane highway because, all things being equal, the likelihood of sitting in traffic is going to be less. 900 MHz is not applicable worldwide. There are places that you cannot use 900 MHz. You get more distance (no gateway device is needed), and it has low power consumption, but the fidelity is not as good. There's a low delay so there is no issue with lip synchronization. As mentioned earlier, higher frequencies enable you to send more information, so it would make sense that 2.4 GHz would enable you to send more information than you could with 900 MHz.
Bluetooth (Traditional) Bluetooth is a radio frequency signal that has become a standard. The wireless protocol for exchanging data is up to 100 meters, thus making it far-field. It uses the EM waves to carry data at the carrier frequency of 2.4 GHz with the bandwidth of 1 MHz. It has 79 channels. It uses a lot of power because it is always on. When Bluetooth was first introduced, you would constantly have to charge any devices utilizing Bluetooth because the Bluetooth was constantly on. Examples of devices using traditional Bluetooth are garage door openers, baby monitors, and wireless headsets. The drawbacks include it is expensive, it has a high current drain, and there's a delay in the sound, which can cause a mismatch between audio and visual signals. It is also expensive to use in devices.
Bluetooth Low Energy (BLE) Today, most devices are using Bluetooth Low Energy, which is also called Bluetooth Smart or Bluetooth 4.0, which was introduced in 2011. Bluetooth was originally designed to transfer information from computers to printers and fax machines. It was never meant to send audio waves, which is why it had high power consumption. Bluetooth Low Energy still has the 2.4 GHz carrier frequency, but it has a much lower power consumption now because it only will exchange small amounts of data periodically. Bluetooth Low Energy also goes into a sleep mode so it uses less energy. It will run when it needs to. The connection time is quick, just a few milliseconds as compared to more than 100 milliseconds for traditional Bluetooth. The codec was rewritten to allow for this nearly instantaneous transmission. It is used in many devices such as Fitbits, blood pressure monitors, and a host of other devices. The advantages of BLE are:
Better battery consumption than traditional Bluetooth.
Simplicity: the radio is based on the familiar Classic Bluetooth radio, and its simple mode of operation can be managed by a small protocol stack.
Robust radio: designers can target a line-of-sight range of as much as 100m. A frequency-hopping scheme makes a Bluetooth LE radio highly resistant to interference.
Real-time operation: a connection between devices can be made, data transferred and the connection shut down, in just 3ms
Compatibility: Bluetooth is by far the best known personal area networking technology in the world, and is backed by all the main manufacturers of consumer devices
A new way to monitor vital signs (that can see through walls)/Dina Katabi At MIT, Dina Katabi and her team are working on a bold new way to monitor patients' vital signs in a hospital (or even at home), without wearables or bulky, beeping devices. Bonus: it can see through walls. In a mind-blowing talk and demo, Katabi previews a system that captures the reflections of signals like Wi-Fi as they bounce off people, creating a reliable record of vitals for healthcare workers and patients. And in a brief Q&A with TED curator Helen Walters, Katabi discusses safeguards being put in place to prevent people from using this tech to monitor somebody without their consent.
"Using this technology, we can generate a three-dimensional image of the space around the Wi-Fi transmitter, as if our eyes could see microwave radiation," says Friedemann Reinhard, director of the Emmy Noether Research Group for Quantum Sensors at TU Munich.
US Senator Blumenthal Raises Concerns on 5G Wireless Technology Health Risks at Senate Hearing Last week, U.S. Senator Richard Blumenthal grilled wireless industry representatives, who admitted the industry has done ZERO health & safety studies on 5G technology. Meanwhile,dozens of independent studiesindicates that 5G is a risk to all biological life. Watch the video, onYouTube here, or onFacebookhere.
Dr. James Giordano (2017)- Weaponized Brain Science and Technology: Battlespace/Organized Stalking Applications of Neuroweapons (youtube, pdf, and my notes) Some choice quotes from the esteemed doctor himself: “The brain is the next battlespace…. We are targeting the brain…. Like (in) any race, the morbidity and mortality, going at this speed, with this level of integrity and this level of momentum, is real. We are tracking neurological or brain signatures of key targeted individuals that are thought to represent whole groups. If I understand how his or her brain works and do this on a broad enough scale, I can develop patterns and I can use this in ways that informs my intelligence; this force multiplies and synergizes my human intelligence (HUMINT), my signals intelligence (SIGINT), and my communications intelligence (COMINT). NEURINT (Neuro intelligence) coupled with assessment and access gives me these capabilities. I can utilize neuro-pharmacologics and various forms of brain stimulation to extract information from key intelligence targets.”
by Sayer Ji GreenMedInfo.com The alternative media is justifiably abuzz with a story about the CDC deleting a page on their website admitting that as many as 98 million Americans received polio vaccine contaminated with the cancer-linked monkey virus SV40, with the added twist that although they removed the page sometime after July 11th
. Some of the details of the ‘disappeared’ page read as follows:
Cancer, Simian Virus 40 (SV40), and Polio Vaccine Fact Sheet
SV40 is a virus found in some species of monkey.
SV40 was discovered in 1960. Soon afterward, the virus was found in polio vaccine.
More than 98 million Americans received one or more doses of polio vaccine from 1955 to 1963 when a proportion of vaccine was contaminated with SV40; it has been estimated that 10–30 million Americans could have received an SV40 contaminated dose of vaccine.
SV40 virus has been found in certain types of cancer in humans, but it has not been determined that SV40 causes these cancers.
The majority of scientific evidence suggests that SV40-contaminated vaccine did not cause cancer; however, some research results are conflicting and more studies are needed.
Polio vaccines being used today do not contain SV40. All of the current evidence indicates that polio vaccines have been free of SV40 since 1963.
APNewsBreak: Feds share watchlist with 1,400 private groups
February 20, 2019, By MATTHEW BARAKAT
The federal government has acknowledged that it shares its terrorist watchlist with more than 1,400 private entities, including hospitals and universities, prompting concerns from civil libertarians that those mistakenly placed on the list could face a wide variety of hassles in their daily lives.
The government’s admission that it shares the list so broadly comes after years of insistence that the list is generally not shared with the private sector.
Gadeir Abbas, a lawyer with the Council on American-Islamic Relations, which has filed a constitutional challenge to the government’s use of the watchlist, called the government’s admission shocking. “We’ve always suspected there was private-sector dissemination of the terror watchlist, but we had no idea the breadth of the dissemination would be so large,” Abbas said.
The watchlist is supposed to include only those who are known or suspected terrorists but contains hundreds of thousands of names. The government’s no-fly list is culled from a small subset of the watchlist.
Critics say that the watchlist is wildly overbroad and mismanaged, and that large numbers of people wrongly included on the list suffer routine difficulties and indignities because of their inclusion.
The government’s admission comes in a class-action lawsuit filed in federal court in Alexandria by Muslims who say they regularly experience difficulties in travel, financial transactions and interactions with law enforcement because they have been wrongly added to the list. The Associated Press is the first to report on the disclosure after reviewing the case documents.
“The likelihood of stigma or adverse consequences is increased” every time the government shares the list with a private organization, a foreign government or any other agency, he said.
The exact number on the list is kept secret by the government, but it acknowledged in an earlier lawsuit that it adds hundreds of thousands of names to the list every year. It also emphasized that names are routinely removed from the list.
“It is a fool’s errand,” Abbas said of the watchlist’s purported goal. “They are trying to predict, among the innocent, which people will be terrorists. That is an impossibility.”
Disable Foreign, Abduction, ET, Alien Implants I How To Guide
Guide To Disable Implants
This instruction guide below was provided by a “positive” ET and channeled though a loving friend of mine with the intention of informing others on how to deactivate “alien” implants based on its location and provides other options if you’re unsure where the implant has been placed.
You will need some materials that may or may not already be in your home, please see instructions to your specific circumstances and read the details thoroughly before you start assembling your device.
Implants Located In The Ear You Will Need: One 9 volt battery Two strong magnets Copper wire
How To Disable Implants In The Ear
You will need copper wire to be wrapped around, or touching both of the magnets.
You will need to put one magnet on each side of your ear that the implant is in, so that a positive and negative charge is going through the ear structure.
You will need to use the other tips of the copper wire to connect to the 9 volt battery. This will not shock or hurt you.
You connect the Positive and Negative to the of the copper that surrounds the magnet. This will put a small electrical pulse through the magnet, this creates a disturbance that will overload the implant and destroy the working abilities of it.
Disabling Implants In The Neck or Body
You Will Need:
Copper Wire Several Magnets 2 Nine Volt Batteries For Neck/Arm/Leg/Ankle 4 Nine Volt Batteries For Body/Chest/Waist
How To Disable Implants In The Neck or Body
You will be making a device that looks like a necklace or a strap and will wrap this around where the implant is located.
There is a way that you can take very powerful magnets that are of the same polarities, you will need enough to connect around the area where the implant is located.
You will use either the positive or negative side of the magnet, you will make them into a strap of some kind, connecting the series of magnets all together (like a necklace) with copper wire or having copper wire touch all of the magnets.
They all have to have a connection via the copper wiring, otherwise, this will not work. The copper wire has to touch every magnet, so that the energy goes through all of them. You can use an electrical tester to ensure every connection is made.
If you are using this on the neck or a large area you will want to use two 9 volt batteries with one on each side to run this though.
You will need to use the other tips of the copper wire to connect to the 9 volt battery. This will not shock or hurt you.
You connect the Positive and Negative to the of the copper that surrounds the magnet. This will put a small electrical pulse through the magnet, this creates a disturbance that will overload the implant and destroy the working abilities of it.
My Gear: As a Targeted Individual, here is the Shielding I wear Jay
This article is for targeted individuals. If you are not one, but would like to know more about the phenomenon of private networks and governments using advanced technology to remotely harass, see Bigger than Snowden. This article consists of the following sections: Intro #0- What I’m Shielding With Today (my full wearable shielding wardrobe) #1- Head Shielding (defense against subliminal V2K, mental manipulation) #2- Versatile Shielding (defense against DEW) #3- Sleep Easy (defense against sleep disruption; building a small head tent to block frequencies and help sleep at night) #4- Final Thoughts on Shielding For those interested in Shielded Areas (work in progress), please see my article on how I’ve built and bought shielding areas for protection at home. These are enclosed areas that cover the entire area from harmful frequencies. ad on.
TARGETED INDIVIDUAL TESTIMONY
Thank you for keeping me abreast of these developments. I am experiencing interference in obtaining an apartment since being forced to sell my home in December. After contacting in excess of 25 available apartment units, I have been met with realtors who will no longer contact me, landlords changing terms to leases at last minute and condo boards not responding to my applications even though I have outstanding credit, references and offered to pay 6 months upfront. My daughter suggested that maybe when they do a background check, the FRAUDULENT psyche diagnosis I received in 2016 could possible be coming up? This opens another area of discussion and exposure that fraudulent psyche diagnosis of Targeted Individuals experience...it not only allows CPS to indoctrinate minor children into "the system", strips Second Amendment Constitutional Rights and now very possibly The Fair Housing Act of 1968. - Anonymous TI TESTIMONY 2:
Thank you for makng it clear that Morgellons is not something you "catch," and can give to someone. I am just starting and found our house full of the fuorescent fibers. I have found the fibers to be more of a distraction. They seem to respond to minimal air currents with a strong attraction to static. They are not the cause of the wounds and they are not reproducing inside anyone. They seem to get in wounds and I have been considering the possibility breathing them may play a role. We had our blower altered to run more than normal likely to keep the exposures airborne.
I have uncovered some of the major players responsible for arranging our family this experience and cannot motivate the local police. Are you aware of any outside help I could contact?
thank you. one more question. as this started and we were continually being broke into two materials left by visitors were found and collected. one is a fine white powder. the other is a some of white fuzz that is light blue under black light and singly the fibers are a very fine dust and a fraction in size to the usual orange green, and blue fibers we found. this may be the skin fungus but not sure.
something else I haven't seen mentioned is it seems an invisible antenna was sprayed on several inside walls and in the attic. I get a max RF signal yet never a source or device; I get this high output signal even with the power off and cable disconnected. Not sure how it would get power. The meter shows nothing when the power is off. Drexel University developed a product this might be but there seems no way to test. I plan to use rubbing compound to see if it takes it off our car. I read it works well on slass...
I have a KJB DD802 which has an additional indicator over the strongest bar levels that is supposed to occur as indication the device antenna is pointing directly at the RF source, In this house a black light shows fine purple spots and with daylight and a loupe you see these areas have then been lightly sprayed with their nasty particles and fibers. After leaving our previous house because of the break-ins and contaminations we are told the people renting this place asked for two more weeks. This place came with several signs of being prepared.
At this last place there was a day that my wife noticed a painting crew waiting in the neighborhood as she was leaving. When she returned there were wet drops of something on the back patio but no signs of paint to the house. I now think they sprayed the tree because it had an unusual sparkle at times and we were intensely monitored.
Anyway. I get the full signal in some areas on these walls and ceiling and nothing is behind these walls with a much weaker signal from the opposite direction on the walls I can access from behind. This signal does not change with the power completely off. I also monitored the meter while the power was off to see if something had been connected that bypassed the circuit breakers but no power use was added. I'm no expert but the RF signal I show is powered.
This just started for us and we do have a 6 and 15 year old to worry which has me on high alert. We just realized we have quite a bit of the sporotrichosis coating...which I think is the fuzz we collected.. and started SSKI. Your the first person that made sense. I see why so many get labeled psychiatric. I only know from our experience and stopped being passive after realizing what this actually involved. I wrote to Drexel for more info and will keep you posted. Good luck and if anyone wants to talk about going on the offensive please contact us. cheers
Transparency will play a key role in exposing these attacks. You will want to talk to Melinda. She pulled much of the data. Also, the DCS is pure fantasy but it is active and as long as we are in Arizona it could put the kids at risk so be careful with it. We have tons of data and it takes so much time to find some things. The google data we got has thousands of GPS coordinates. The people following were also using our hijacked email accounts. After getting one account back I got the data before losing it again. You can see these bozos all around us and even breaking in and taking her phone by GPS. We didn't know what happened until getting this. They also had all our phone calls going back to Texas 2015 in speech to text format. Cant figure how they did this, but they are all our cell calls.
Moderator: Julia Thompson HOST: Evangelist Linda D. Casraiss
February 18, 2019 at 7:00 pm.
Do not fear, for I am with you; do not anxiously look about you, for I am your God. I will strengthen you, surely I will help you, surely I will uphold you with My righteous right hand.’ Isaiah 41:10
Cap with metal and blackout fabric
This is an experimental hat to see if it might help block EMF completely from the head. Our regular cap has 4 layers of metallic fabric and one layer of blackout fabric. It can be grounded with a grounding wire attached to the metal inside.They are covered with black broadcloth (green is picture only). The hats are hand washable, no dryer. You can attach magnets or put any other materials such as magnets, ice packs, rubber or silcone or any sonic blocking materials underneath.
The metallic/rubber is $52 and made upon order. We expect feedback as to how it helped you with your particular problem.They do not stop V2K. Many people are saying that the hat helps, especially where the moods are being affected, subliminal thoughts, or dreams are being implanted, which may be frequencies targeting you with a field of frequencies. You can let out the tie cord and let it drape down over your neck to cover more. It comes down over the forehead and ears.
email@example.com EXPLANATION AND INSTRUCTIONS FOR CANADIAN CLASS ACTION LAWSUIT This is a class action lawsuit against Canadian police, government, and medical offices that have denied help to victims of organized stalking and harassment. Victimized visitors to Canada who were denied help may participate. Human Rights Case: The Canadian Human Rights International Organization (CHRIO) has offered to review denials-of-help files and statements from Canada and other countries. Please follow the directions as per the lawsuit. The lawsuit and human rights case are registered under The West Coast Society For All Victims Of Organized Stalking And Electronic Harassment. This does not detract from each victim's claim. It's simply a protective measure to keep victims' names more private. Please indicate whether your files and statements are for the lawsuit and/or for CHRIO. Two sets of files and statements will be necessary if you are participating in both. There is no courier service drop-off at the town below, so please send your files and statements through postal service. The West Coast Society For All Victims Of Organized Stalking And Electronic Harassment PO Box 534 Heriot Bay, British Columbia V0P 1H0 Canada Inquiries, assistance, or to contact author June Ti:firstname.lastname@example.org Society:www.westcoast-oseh.com Book:www.noordinarystalking.com
TARGETED INDIVIDUAL SUPPORT GROUPS
BAY AREA, CALIFORNIA SUPPORT GROUP
For more information, please contact Constance Rose.
Moderator: Ella Whistleblower Heroes Show Time: Starting at 3pm EST / 12pm PST every Tuesday Call-to-listen: 1-605-468-4702 Join online: www.freedomslips.com (Click on studio A in the left-hand corner)
Moderator: Kate Ryan New England Support Group Time: 7:00 p.m. EST Call-In Number:(605) 562-0444 Access Code: 133472# Pin: #1 Moderator: Ella FFTI & Targeted Justice Interview Night Begins at 9pm EST / 6pm PST every Tuesday Call In #: 1-515-739-1285 ID 400014# www.freeconferencecall.com
Moderator: Frank Allen
Call-in number: 1-646-749-3112 (GoToMeeting)
Access code: 450-414-301
Or, download the GoToMeeting app and enter the code 450-414-301.
We have no P.O. Box right now, we will have a new post office box in the near future at another post office. Make checks payable to CAHT, ask for a physical address by writing an email to CitizensAHT@protonmail.com.
$30.00, free “Are you a Targeted Individual?” booklet, directed energy brochure, psychiatric living will, membership card (We don't have any booklets right now. There will be a new edition in January 2019)
www.freeconferencecall.com Sunday at 8:30 P.M. E. Coast, 7:30 Central, 6:30 Mountain, 5:30 W. Coast Dial (605) 475-4779, Access Code: 607080. ID: electricrose222, Moderator: Neal
THANK YOU FOR YOUR DONATIONS THIS MONTH!
TAX DEDUCTIBLE DONATION WITH PAYPAL: CitizensAHT@protonmail.com If you donate, please request the IRS Tax Number.
If you are having problems receiving your newsletter, try submitting another email address. Also, look in spam or trash folders or change settings in your email.
Please print a copy of this newsletter and any newsletters you wish to maintain. Just having them in your email won't save them. You can also copy them into a Word Document with .2 margins.
This is an internet reference newsletter.A link to the original article is provided in the colored title line. Articles are referenced based on the subject matter that may be of interest to victims of civil rights abuses, including electronic harassment and stalking. We claim no authorship, of these references, they are presented for your education and consideration of the information. The purpose is for TI education only. The reference may contain only part of the original article due to space limitations here. CAHT neither agrees with nor disagrees with any opinions or information contained herein. Please go to the link to read the complete article. Thank you.
The information provided on this web site and those it links to, including embedded videos and other content from other web sites, is for educational purposes only. The information and products made available through this web site are not intended to provide medical advice, diagnose, treat, or cure any health conditions, or be construed as a therapeutic recommendation or prescription for any disease or symptom. The US Food and Drug Administration has not evaluated products or statements about specific products, health topics, or any suggested methods presented. Viewers should not attempt self-diagnosis or self-treatment of any kind, and should not discontinue any medication or therapy or make any health-related decisions without the advice of a licensed medical physician. You should consult with a physician or healthcare professional before starting any diet, exercise, or supplementation program, before taking any medication or nutritional supplement, or if you have or suspect you might have a health problem. Each person is different, and the way you react to a particular product may be significantly different from the way other people react to such product. You should consult your physician or healthcare professional regarding any potential adverse interactions between medication you are currently taking and nutritional supplements before taking any such supplements. Citizens Against Harmful Technology disclaim any liability, loss, or risk incurred, directly or indirectly, as a result of the use and application of the contents of this site. If you are unwilling to be bound by this disclaimer, you should not view this site or newsletter. All content posted on this site is commentary or opinion and is protected under Free Speech. We are not responsible for content written by and hosted on third-party websites. The information on this site is provided for educational and entertainment purposes only. It is not intended as a substitute for professional advice of any kind. We assume no responsibility for the use or misuse of this material. All trademarks, registered trademarks and servicemarks mentioned on this site are the property of their respective owners.